Check out our smart new solar package deals

Victron Multiplus-II Inverter/Charger

The Victron MultiPlus-II combines the functions of the MultiPlus and the MultiGrid. It has all the features of the MultiPlus, plus an external current transformer option to implement PowerControl and PowerAssist and to optimise self-consumption with external current sensing. It also has all the features of the MultiGrid with built-in anti-islanding and an increasingly long list of country approvals.

FEATURES

PowerAssist
  • Prevention of overload of a limited AC source, such as a generator or shore power connection. 
  • First, battery charging will automatically be reduced when otherwise an overload would occur. 
  • The second level will boost the output of a generator or shore side supply with power taken from the battery.
ESS: Energy Storage Systems
  • Automatically switches between or combines grid, battery and solar energy based on live-pricing, predicted energy-use and solar yield so it’s always consuming the cheapest energy.
Uninterrupted AC power 
  • In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads.
  • This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption.
Remote Monitoring and Control
  • When coupled with a GX device you can monitor and control your system locally (LAN) or remotely using the free VRM app or portal website, eg, make adjustments or  auto start using a backup generator.

 

Download the datasheet:

Not sure which system is best for you? Get in touch for more information about any of the above products or for a no-obligation quote.

Victron EasySolar Inverter/Chargers

The Victron EasySolar 24V/1600VA Inverter/Charger Combi is an all-in-one power solution combining a MPPT solar charge controller, an inverter/charger and AC distribution in one enclosure. It’s easy to install, with a minimum of wiring.

FEATURES

The solar charge controller: Blue Solar MPPT 100/50
  • Up to three strings of PV panels can be connected to three sets of MC4 (PV-ST01) PV connectors.
The inverter/charger: MultiPlus Compact 12/1600/70 or 24/1600/40
  • The MPPT charge controller and the MultiPlus Compact inverter/charger share the DC battery cables (included).
  • The batteries can be charged with solar power (BlueSolar MPPT) and/or with AC power (inverter/charger) from the utility grid or a genset.
AC distribution
  • The AC distribution consists of a RCD (30mA/16A) and four AC outputs protected by two 10A and two 16A circuit breakers.
  • One 16A output is controlled by the AC input: it will switch on only when AC is available.
PowerAssist
  • Unique PowerAssist technology protects the utility or generator supply from being overloaded by adding extra inverter power when needed.
    Unique solar application software
  • Several software programs (Assistants) are available to configure the system for various grid interactive or stand-alone applications. See the Victron Energy website.

Download the datasheet:

Not sure which system is best for you? Get in touch for more information about any of the above products or for a no-obligation quote.